A general purpose electronic sounder for fire, security and industrial applications; the DC Sonos Sounder Beacon is certified to EN54.
A general purpose electronic sounder for fire, security and industrial applications; the AC Sonos Sounder Beacon is certified to EN60950.
A general purpose beacon for fire, security and industrial applications.
The Sonos Base Sounder is a low profile sounder designed to be fitted under a detector head for detection and audible alarm at the same point.
The Sonos Base Sounder Beacon is a low profile sounder beacon designed to be fitted under a detector head for detection and audio-visual alarm at the same point.
A flush mount alarm sounder designed for use in fire, security and industrial applications.
The Remote indicator unit has been designed for use with either conventional or addressable smoke or heat detectors to indicate detection operation.
Flashguard weatherproof LED beacons are ideal visual indicators in a variety of applications.
The Nexus 110 is a high output, low current consumption sounder designed for industrial, fire and marine use.
The Nexus 110 is a high output, low current consumption sounder designed for industrial, fire and marine use.
The Nexus voice sounder combines normal sounder signals with clear, synchronised voice messages for a wide range of fire and industrial applications.
When combined with a Fire Alarm Interface Control unit (FIU 002) voice sounders can transmit up to 4 messages over the same sounder circuit with no additional wiring.
Gas Extinguishing Interface Control Unit
When combined with a GIU 002 unit voice enhanced sounders transmit 4 clear messages for each stage of alarm in a Gas Extinguishing system.
Flashguard industrial xenon beacons are available with a choice of voltages and colours. Weatherproof to IP65, they are ideal for almost any industrial application.
Flashguard industrial xenon beacons are available with a choice of voltages and colours. Weatherproof to IP65, they are ideal for almost any industrial application.
The Syrex IS Sounder Beacon is an intrinsically safe combined sounder and beacon.
The Syrex IS Beacon is an intrinsically safe beacon fitted with 6 high intensity LEDs and a prismatic lens for effective visual warning in hazardous area applications.
The Syrex Exd-3 is an electronic sounder designed for potentially explosive atmospheres and harsh environmental conditions.
The Exd Beacon is a powerful xenon beacon designed for use in hazardous area applications.
The Exd Bell is designed for use in Zone 1 and 2 areas and for areas requiring a high degree of weatherproof protection.
The Exd Buzzer is an explosionproof buzzer designed for use in hazardous areas where a distinctive signal is required.
The Klaxalarm Terrier is a standalone, self-contained fire alarm designed for use in small retail, industrial or temporary buildings as well as construction sites, campsites or marquees.
This Klaxalarm call point is supplied with both a double pole changeover set of contacts which enables either a normally open or normally closed operation.
This Klaxalarm call point is supplied with both a resistor and normally open clean contact electrical options.
Floor mounted door holders are designed to provide convenient access by holding doors open and releasing them when an alarm is triggered.
This type of door holder magnet can be used for a variety of applications due to its rugged and versatile design.
Salamander is a system of battery powered, magnetic fire door holders that are linked by radio signals to a central controller.
